Antena Rectangular con Ranuras y Muescas para Aplicaciones Biomédicas

Pedro  Vargas-Chable; Margarita Tecpoyotl-Torres; Ramon  Cabello-Ruiz; Jose  Mireles Jr. Garcia

doi:10.30973/progmat/2024.16.2/1

Autores/as

Pedro Vargas-Chable Universidad Autónoma del Estado de Morelos. Facultad de Ciencias Químicas e Ingeniería https://orcid.org/0000-0002-2290-3740
Margarita Tecpoyotl-Torres Universidad Autónoma del Estado de Morelos. Instituto de Investigación en Ciencias Básicas y Aplicadas-Centro de Investigación en Ingeniería y Ciencias Aplicadas https://orcid.org/0000-0002-4336-3771
Ramon Cabello-Ruiz Universidad Autónoma del Estado de Morelos. Facultad de Ciencias Químicas e Ingeniería https://orcid.org/0000-0003-3215-5034
Jose Mireles Jr. Garcia Universidad Autónoma de Ciudad Juárez. Centro de Investigación en Ciencia y Tecnología Aplicada

DOI:

https://doi.org/10.30973/progmat/2024.16.2/1

Palabras clave:

2.4 GHz, Ancho de banda, Ganancia, Ansys Electronics, HFSS

Resumen

En este artículo se presenta el diseño y simulación de una antena de parche con alimentación por microtira para aplicaciones biomédicas utilizando como substrato FR-4. La optimización de su respuesta se realiza parametrizando elementos, a partir de (1) una antena rectangular sencilla, (2) un arreglo de ranuras en la parte lateral derecha, (3) ranuras y cortes en las esquinas de la antena, (4) con los elementos de (3) y una muesca superior en el parche, obteniendo una evolución hasta obtener a (5) una antena en la que se integran a todos los elementos parametrizados. La variación de la respuesta de la antena rectangular parte del modelo (1) con f_r=2.22 GHz, G=2.22 dB, S11=-22.81, BW=118.8 MHz, a 2.24 GHz, VSWR=1.25 dB y eficiencia de 0.085, al modelo (5) con f_r=2.5 GHz, VSWR=1.35 dB, G=2.96 dB, S11=-22.16 dB, BW=69 MHz a 2.54 GHz y eficiencia de 0.47. Esto es, mejorando los parámetros relevantes de la antena, a la ganancia en un 34.54% y la eficiencia en 552.94%.

Biografía del autor/a

Pedro Vargas-Chable, Universidad Autónoma del Estado de Morelos. Facultad de Ciencias Químicas e Ingeniería

Pedro Vargas Chable obtained a B.S. degree in Electrical and Electronics Engineering from the Universidad Juarez Autonoma de Tabasco in 2008. From 2009 to 2012 he worked as a Specialist in the Evaluations of Lighting Conditions and Non-Ionizing Radiation under NOM-025 and 013 of the STPS respectively, as well as signatory before the ema of the latter in the company Tecnología del Ambiente S. A de C. V. From 2012 and 2019 he obtained the degree of Master and PhD in Engineering and Applied Sciences with Terminal option in Electrical Technology, by the Autonomous University of the State of Morelos (UAEM). In October 2023, he became a member of the Sociedad Mexicana de Materiales A. C. He is currently working on the development of antennas for biomedical applications, design, simulation, and modeling of microactuators, microgripper, accelerometers, RF MEMS and VLSI devices applying Finite Element Analysis (FEA).

Margarita Tecpoyotl-Torres, Universidad Autónoma del Estado de Morelos. Instituto de Investigación en Ciencias Básicas y Aplicadas-Centro de Investigación en Ingeniería y Ciencias Aplicadas

Margarita Tecpoyotl Torres received the Mathematician degree from the University of Puebla, Mexico (1991). She was also graduated as Electronic Engineer (1993). She received the M.Sc. and Ph.D. degrees in Electronics from National Institute of Astrophysics, Optics and Electronics, INAOE, México (1997 and 1999, respectively). Dr. Tecpoyotl works, since 1999, at UAEM, Mexico, where she is currently titular professor. She has been visiting research scientist at University of Bristol (2001), UK. She led the Winner team of Boot Camp, UAEM Potential, obtaining support to participate in Full Immersion Program, USA (2014). She won the 3rd place in the Royal Academy of Engineering´s Leaders in Innovation Fellowships final pitch session, in UK (2015). Her main research interest includes MEMS, Antenna design, entrepreneurship, innovation, and development of educational programs. She holds the status of National Researcher (SNI), since 1999.

Ramon Cabello-Ruiz, Universidad Autónoma del Estado de Morelos. Facultad de Ciencias Químicas e Ingeniería

Ramon Cabello Ruíz received the Engineer Mechanical degree from the Autonomous University of the State of Morelos, Mexico (2010). He received the M. Eng. And Ph.D. degrees in Center for Research in Engineering and Applied Sciences, Mexico (2012 and 2017, respectively). He holds three SolidWorks certifications, (Mechanical Design level Associate, Mechanical Design level Professional, and Simulation level Associate). Dr. Cabello Works, since 2019, at UAEM, Mexico, where he is a part-time teacher. His area of expertise focuses on the design and mechanical analysis of microelectromechanical systems. He holds the status of National Researcher (SNI), since 2023. He is also a member of the National Register of Researchers in Materials Sciences.

Jose Mireles Jr. Garcia, Universidad Autónoma de Ciudad Juárez. Centro de Investigación en Ciencia y Tecnología Aplicada

Dr. Mireles Jr. is currently a Research Professor of the Department of Electrical and Computer Engineering of the Institute of Engineering and Technology of UACJ since July 1996. He is an External Member of the Graduate School of Engineering of the University of Texas in El Paso (UTEP) since 2016. Graduated from the University of Texas at Arlington (Ph.D.) in 2002, and from the Instituto Tecnologico de Chihuahua, (M.Sc.) in 1996. Head and founder of CICTA from UACJ where he has developed several Technological Development and Innovation projects with patents in Microtechnology. He has been director and co-director of national network projects, and technical director during the establishment of innovation centers in the state of Chihuahua, such as: CICTA, the Center for Molds and Dies of the State of Chihuahua (CIMIT), and the IA Center in which he currently serves as liaison director of projects development.

Citas

Ashok Kumar, S., T. Shanmuganantham. Design of Clover Slot Antenna for Biomedical Applications. Alexandria Engineering Journal. 2017, 56(3), 313–317. https://doi.org/10.1016/j.aej.2016.08.034.

Mahalakshmi, N., A. Thenmozhi. Design of Hexagon Shape Bow-Tie Patch Antenna for Implantable Bio-Medical Applications. Alexandria Engineering Journal. 2017, 56(2), 235–239. https://doi.org/10.1016/j.aej.2017.01.028.

Soontornpipit, P A Dual-Band Compact Microstrip Patch Antenna for 403.5 MHz and 2.45 GHz on-Body Communications. Procedia Computer Science. 2016, 232–235. https://doi.org/10.1016/j.procs.2016.05.105.

Ortega-Palacios, R., Trujillo-Romero, C. J., Cepeda Rubio, M. F., Vera, A., Leija, L., Reyes, J.L., Ramírez-Estudillo, M. C., Morales-Alvarez, F., Vega-López, M. A. Feasibility of Using a Novel 2.45 GHz Double Short Distance Slot Coaxial Antenna for Minimally Invasive Cancer Breast Microwave Ablation Therapy: Computational Model, Phantom, and in Vivo Swine Experimentation. Journal of Healthcare Engineering. 2018, 1–10. https://doi.org/10.1155/2018/5806753.

Liu, L., Peng, A., Xiaonan,W., Chaoqun, Z. Measurement Analysis of Polarization Distribution of Static On-Body Propagation Channels. In: 7th IEEE International Symposium on Microwave, Antenna, Propagation, and EMC Technologies (MAPE). 2017. https://doi.org/10.1109/mape.2017.8250787.

Younes, S., Kaoutar, S. A., Jaouad, F. Study and Design of a Patch Antenna for Biomedical Applications. In: ITM Web of Conferences. 2023, 03003. https://doi.org/10.1051/itmconf/20235203003.

Sarmah, K., Angan, S., Kandarpa, K. S., Sunandan, B. Dual-Band Microstrip Patch Antenna Loaded with Complementary Split Ring Resonator for WLAN Applications. Advances in Intelligent Systems and Computing. 2015, 573–80. https://doi.org/10.1007/978-81-322-2250-7_57.

Khraisat, Y. S. Increasing Microstrip Patch Antenna Bandwidth by Inserting Ground Slots. Journal of Electromagnetic Analysis and Applications. 2018, 10(1), 1–11. https://doi.org/10.4236/jemaa.2018.101001.

Siju, J. T., Mehajabeen, F. Bandwidth Improvement of Microstrip Patch Antenna Using Partial Ground Plane. International Journal of Engineering Research. 2015, 4(5). https://doi.org/10.17577/ijertv4is050205.

Küçükcan, S., Kaya, A. Dual-band Microstrip patch antenna design for Wi-Fi Applications. European Journal of Science and Technology. 2022. https://doi.org/10.31590/ejosat.1084147.

Mohd-Zaini, S. R., Abdul-Rani, K. N. Wearable inset-fed FR4 microstrip patch antenna design. In: IOP Conference Series: Materials Science and Engineering. 2018, 318, 012050. Available from: https://doi.org/10.1088/1757-899x/318/1/012050.

Adnan, M. A., Kamilia, K., Yamada, Y., Idris, I. H., Ali, A. A., Hamdan, H. Biocompatible sago aerogel material as a substrate for antenna application. Journal of Physics: Conference Series. 2022, 2250(1), 012005. https://doi.org/10.1088/1742-6596/2250/1/012005.

Singh, J., Singh, T., Sohi, B. S. Design of slit loaded rectangular microstrip patch antenna. In: 2nd International Conference on Recent Advances in Engineering & Computational Sciences. 2015. https://doi.org/10.1109/raecs.2015.7453359

Sukhija, S., Sarin, R. K. Design and performance of two-sleeve low profile antenna for bio-medical applications. Journal of Electrical Systems and Information Technology. 2017, 4(1), 49–61. https://doi.org/10.1016/j.jesit.2016.10.013.

Antena Rectangular con Ranuras y Muescas para Aplicaciones Biomédicas

Autores/as

DOI:

Palabras clave:

Resumen

Biografía del autor/a

Pedro Vargas-Chable, Universidad Autónoma del Estado de Morelos. Facultad de Ciencias Químicas e Ingeniería

Margarita Tecpoyotl-Torres, Universidad Autónoma del Estado de Morelos. Instituto de Investigación en Ciencias Básicas y Aplicadas-Centro de Investigación en Ingeniería y Ciencias Aplicadas

Ramon Cabello-Ruiz, Universidad Autónoma del Estado de Morelos. Facultad de Ciencias Químicas e Ingeniería

Jose Mireles Jr. Garcia, Universidad Autónoma de Ciudad Juárez. Centro de Investigación en Ciencia y Tecnología Aplicada

Citas

Descargas

Publicado

Cómo citar

Número

Sección

Licencia

Artículos más leídos del mismo autor/a

Idioma

Información

Número actual

Indexado