Positioning of a 3-degrees-of-freedom robot with pneumatic actuators
DOI:
https://doi.org/10.30973/progmat/2021.13.2/2Keywords:
Pneumatic robot arm, fuzzy control, pneumatic actuators, intelligent control, neurofuzzy algorithmAbstract
Interest in the use of pneumatic actuators has become increasingly significant, especially because of the potential benefits of employing clean energies. There are previous works related to this project; some made abroad that innovates in control methods but only in specific applications, and others in Mexico that progressively increase the complexity of the system. In this paper the difficulty of a generic threedegrees-of-freedom (DoF) robot arm control is tested, searching for the most efficient method to reproduce the positioning of the final effector (a griper) accurately. Furthermore, the ambitious goal of the project is to adequately develop an algorithm capable of being properly adjusted to any multipurpose robot system with pneumatic actuators. It is carefully considered the various non-linearities of the system. This work relied mostly on intelligent control techniques and modern programmable devices, the intention is to achieve similar or better results than previous projects. The possible combination of intelligent and even classical control can reasonably achieve the estimated conclusion, the first being flexible for developing robust design for non-linear systems.
References
R. Kelly and V. Santibáñez, Control de movimiento de robots manipuladores. Pearson educación, 2003.
M. Haegele, “Executive Summary World Robotics 2018 Service Robots.” 2018.
E. Gonzales Islas, “La era de los robots,” MILENIO, 2019. https://www.milenio.com/negocios/laera-de-los-robots.
H. Huifeng and C. Chen, “‘Made In China 2025’: a peek at the robot revolution under way in the hub of the ‘world’s factory,’” South China Morning Post. 2018.
T. Hesselroth, K. Sarkar, P. P. Van Der Smagt, and K. Schulten, “Neural network control of a pneumatic robot arm,” IEEE Trans. Syst. Man. Cybern., vol. 24, no. 1, pp. 28–38, 1994. https://doi.org/10.1109/21.259683
J.M. Ramos-Arreguin, S. TovarArriaga, J. Vargas-Soto, and M. AcevesFernandez, “FPGA embedded pd control of A 1 dof manipulator with a pneumatic actuator,” Int. J. Robot. Autom., vol. 31, 2016, https://doi.org/10.2316/Journal.206.2016.3.206-4362.
S. Sánchez Solar, J. C. Pedraza Ortega, E. Gorrostieta-Hurtado, and J.-M. Ramos-Arreguín, “Path Tracking Simulation for a Two-Degree-ofFreedom Pneumatic Manipulator Robot,” 2016.
S. Mu, S. Goto, S. Shibata, and T. Yamamoto, “Intelligent position control for pneumatic servo system based on predictive fuzzy control,” Comput. Electr. Eng., vol. 75, pp. 112–122, 2019. https://doi.org/10.1016/j.compeleceng.2019.02.016
R. K. Katzschmann et al., “Dynamically closed-loop controlled soft robotic arm using a reduced order finite element model with state observer,” in 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft), 2019, pp. 717– 724. https://doi.org/10.1109/ROBOSOFT.2019.8722804
J. A. P. Delgado, J. M. R. Arreguín, G. I. P. Soto, and E. G. Hurtado, “Design, kinematic model and simulation of a 4- DOF pneumatic robot,” Pist. Educ., vol. 40, no. 130, 2018.
K. Ogata and J. W. Brewer, “Modern Control Engineering,” J. Dyn. Syst. Meas. Control, 1971, https://doi.org/10.1115/1.3426465.
V. Bobál, J. Böhm, J. Fessl, and J. Machácek, Digital self-tuning controllers: algorithms, implementation and applications. Springer Science & Business Media, 2006.
H. T. Nguyen, A First Course in FUZZY and NEURAL CONTROL. 1987.
K. M. Passino, S. Yurkovich, and M. Reinfrank, Fuzzy control, vol. 42. Citeseer, 1998.
P. P. Cruz, Inteligencia artificial con aplicaciones a la ingeniería. Alfaomega, 2011.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Programación Matemática y Software
This work is licensed under a Creative Commons Attribution 4.0 International License.
Usted es libre de:
Compartir — compartir y redistribuir el material publicado en cualquier medio o formato. |
Adaptar — combinar, transformar y construir sobre el material para cualquier propósito, incluso comercialmente. |
Bajo las siguientes condiciones:
Atribución — Debe otorgar el crédito correspondiente, proporcionar un enlace a la licencia e indicar si se realizaron cambios. Puede hacerlo de cualquier manera razonable, pero de ninguna manera que sugiera que el licenciador lo respalda a usted o a su uso. |
Sin restricciones adicionales: no puede aplicar términos legales o medidas tecnológicas que restrinjan legalmente a otros a hacer cualquier cosa que permita la licencia. |